Sign Guestbook Back to joetoadam Report abuse
| Date | 2010-08-19 |
| Location |  |
| Message | Dear admin, thnx for sharing this blog post. I found it wonderful. Best regards, Victoria... |
| Date | 2010-08-18 |
| Location | |
| Message | Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I' ll be subscribing to your feed and I hope you post again soon. |
| Date | 2010-08-13 |
| Location | |
| Message | Aw, this was a really quality post. In theory I' d like to write like this too - taking time and real effort to make a good article... but what can I say... I procrastinate alot and never seem to get something done. |
| Date | 2010-08-07 |
| Location | |
| Message | I have discussed this topic with several people, but I think your opinion on it is the most reasonable. |
| Date | 2010-06-17 |
| Location | |
| Message | Hi VEry nice posts i'sure i'sts nice |
| Date | 2010-05-29 |
| Location | |
| Message | Cheap cigarettes online. Cigarettes in every way's matchless brands. Liberation to any power: Common States, France, Italy, Spain, Holland .... Provides a enumerate of the a- online stores: |
| Date | 2010-04-26 |
| Location | |
| Message | Low-cost cigarettes online. Cigarettes world's peerless brands. Delivery to any boonies: Common States, France, Italy, Spain, Holland .... Provides a incline of the best online stores: |
| Date | 2010-04-04 |
| Location | |
| Message | Thanks for your post |
| Date | 2009-08-15 |
| Location | |
| Message | And a big Hello from Orlando  |
| Date | 2009-04-15 |
| Location | |
| Message | The butt joint is the simplest joint to make since it merely involves cutting the members to the appropriate length and butting them together. It is also the weakest because unless some form of reinforcement is used (see below) it relies upon glue alone to hold it together. Because the orientation of the members usually present only end grain to long grain gluing surface, the resulting joint is inherently weak. The butt joint is a very simple joint to construct. Members are simply docked at the required angle (usually 90В°) and required length. One member will be shorter than the finished size by the thickness of the adjacent member. For enclosed constructions, such as four-sided frames or boxes, the thickness of the two adjacent members must be taken into consideration. For example: when constructing a four sided box made from 19mm thick material that is to be of finished size 600mm x 600mm, two of the members will be I4oTuFskPCc4 docked at 600mm and two will be docked at 600mm - 19mm - 19mm = 562mm. |
Page 21 of 22 << First < 18 19 20 21 22 >